Du er her: Kategorier / KEMI & TEKNISKE PRODUKTER / LIMNING OG TÆTNING / PU SKUM / RECA S 28 2K SKUM / S 28 2 KOMP. SKUM 400 ML

S 28 2 KOMP. SKUM 400 ML

Varenr. 0898 228 2

S 28 2 KOMP. SKUM 400 ML

Tilføj til favorit

S 28 2C frame fixing foam 400 ml

Antal i æske
1 stk.

Webpris: 62,54 DKK
Din pris kr. (Log ind)
Pr. 1 stk.


2-component PU frame fixing foam with accelerated reaction and load-bearing capacity

Field of Application:

For installing all types of door frames and windowsills. For filling wall openings and cavities.

Package size:

12

Advice:

The substrates must be stable, clean and free of dust, grease and release agent. The ideal application temperature is +20°C. Screw on the adapter. Turn the cross on the bottom of the can to the right as far as it can go. Hold the can with the valve downwards. Shake the can vigorously at least 30 times. Extrude the foam by pressing the lever. The foam should be of a consistent colour throughout. Shake again if necessary. Important: Can contents must be used within 2–3 min. after activation! (The can may otherwise overheat and burst.) Do not activate the can at temperatures above 25°C. When fitting door frames, brace the frames until the foam has cured. Remove any fresh splashes of foam immediately using PU universal cleaner. Hardened foam can only be removed mechanically.
Please observe the safety instructions on the can and the information on the safety data sheet.
Not UV-resistant!

Advantages:

  • Extremely rapid curing regardless of ambient moisture.
  • Adheres to all conventional construction surfaces except PE, silicone, release agent etc.
  • Outstanding soundproofing and insulating properties.
  • No pre-wetting required
  • No pressure required
  • No shrinking

Contents:

400 ml
Harmonized System Code 39095090
Colour Green
Shelf life from production 12
Chemical basis Two-component polyurethane
Contents 400
SDB URL http://www.sdbpool.de/sdbbrowser/reca/find/?t=46dd8e8e23c713
Type description reca S 28 frame fixing foam
Heat conductance λ 0.032
Container Can
Yield (volume) approx. 8
Building material class B2 - Normally inflammable
Elongation at break 24.6
Water absorption 0.23
Tack-free after 9
Full resilience 2
Moulded density 42.1
Can be cut after 14
Compression strength 9.1
Tensile strength 21.19

Tilbage