Moisture-curing one-component polyurethane foam specially developed for use with foam guns
Field of Application:
Suitable for filling joints on windows and roller shutter boxes and insulating cavities.
The substrates must be stable, clean and free of dust, grease and release agent. Dampen dry surfaces with water (spray). The ideal application temperature is +20°C. Observe the operating instructions of your applicator gun. Shake the can at least 30 times before screwing onto the foam gun and after work interruptions. Do not tilt or overtighten when screwing onto the gun. Remove any fresh splashes of foam immediately using PU universal cleaner. Hardened foam can only be removed mechanically.
Unsuitable for PE, PP, silicone, PTFE
Please observe the safety instructions on the can and the information on the safety data sheet.
- Greatly increased yield
- Accelerated curing
- Very high adhesive strength
- Good thermal and acoustic insulation
- Noise protection tested by ift