arecal Weldspray Eco welding release agent is a silicone-free release agent for welding technology based on highly effective fatty oils.
Field of Application:
arecal Weldspray Eco is a wax-like release agent for welding; silicone free and non-flammable;
Apply release agent to a clean workpiece surface and/or spray in the gun opening. If the workpieces are to be post-treated, (e.g. galvanised, hot galvanised, painted, etc.) perform a test in advance and clean if necessary.
When spraying, please also observe the following:
•Protect can from weld splatter: 20 to 30 cm spraying distance.
•For hollow parts and in tight spaces thoroughly ventilate after spraying; only then begin the welding process.
•Only for use before welding and with sufficient ventilation.
•Set spray cans down outside the welding area. Use during the welding process is prohibited for safety reasons
prevents weld spatter from sticking and considerably increases torch service life.
The release agent does not run and is therefore also suitable for vertical surfaces.